MGP WRM2 Bedienungsanleitung PDF herunterladen (Seite 18)

15-00043

Revision 3

September 2005

The publication, translation or reproduction, either party or wholly, of this document are not allowed without our written consent. 18

11. Select 1 and press ENTER.

- Change the IP Address (in accordance with the facility network scheme) and

press ENTER.

Perform changes, as appropriate, that meet specific network settings (as identified in

Figure 10 above) for:

- IP Address

- Netmask

- Gateway

12. Following completion of configuration, select “q” (Quit), and press ENTER.

- The Main Menu will be displayed (Figure 11 below):

Figure 11: Main Menu

13 Select “s” (Save/Restart) and press Enter.

- The prompt will display “Ready to Restart”

14. Select “y” (Yes) and press Enter.

- The network adapter will restart with the saved parameters.

- The network adapter is now ready for connection.

Position 4: REPEATER MODE WITH RS-232 MONITOR

IT IS IMPORTANT TO

“SAVE/RESTART”

AFTER CONFIGURATION

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Keine Kommentare

MGP WRM2 Bedienungsanleitung Seite 18